suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
They are easy to use and are economical,they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.
The pump comes complete with a flap-check valve.
The pump should be installed in an enclosed environment,or at least sheltered from inclement weather.
* Two-pole induction motor(n=2850 r.p.m)
* Insulation Class B
* Protection IP44
* Continuous service S1
* Thermal protector
* Single-phase 220V/50Hz, 60Hz if request
* Liquid temperature to 600℃
* Ambient temperature to 400℃
* Total suction lift up to 8m
Pump body Cast iron with brass/AISI304 insert if request,reduces the risk of impeller seizure
Pump support Cast iron with brass/AISI304 insert if request,reduces the risk of impeller seizure
Motor housing Aluminum,Sheet steel for CP130
Motor shaft Carbon steel, AISI420/304 SS if request
Mechanical seal Ceramic / Graphite
Bearings 6201 RZ/6201 RZ(0.5HP), 6202 RZ/6202 RZ (1 HP)6204 RZ/6204 RZ (1.SHP, 2HP&3HP)