Description
APPLICATION
Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities.
OPERATING CONDITIONS
– Liquid temperature up to 35°C (for home use
according to EN 60335-2-41)
Temperature max. liquid: 60°C (for other uses)
– Ambient temperature up to 40°C
– Total suction lift up to 7 mt.
– Continuous duty
according to EN 60335-2-41)
Temperature max. liquid: 60°C (for other uses)
– Ambient temperature up to 40°C
– Total suction lift up to 7 mt.
– Continuous duty
MOTOR
– Two-Pole induction motor
(n = 2850 min-1)
– Insulation Class F
– Protection IP 44
(n = 2850 min-1)
– Insulation Class F
– Protection IP 44
MATERIALS
– Pump body: Cast Iron
– Motor Support: Cast Iron
– Impeller: Brass
– Shaft with rotor: Stainless Steel AISI 304
– Mechanical seal: Ceramic/Graphite/NBR
– Mechanical seal (KPM 70): Graphite/Silicon/NBR
– Motor Support: Cast Iron
– Impeller: Brass
– Shaft with rotor: Stainless Steel AISI 304
– Mechanical seal: Ceramic/Graphite/NBR
– Mechanical seal (KPM 70): Graphite/Silicon/NBR
Reviews
There are no reviews yet.